|
Mountz
EZ-Torq Torque Analyzer
|
EZ-TorQ II 10i |
070800 |
1 - 10 |
11.3 - 113 |
1.2 - 11.5 |
17mm Female/Hex* |
4.5 lbs. |
|
EZ-TorQ II 50i |
070801 |
5 - 50 |
56.5 - 565 |
5.8 - 57.6 |
17mm Female/Hex* |
4.5 lbs. |
|
EZ-TorQ II 100i |
070802 |
10 - 100 |
113 -1130 |
11.5 - 115 |
17mm Female/Hex* |
4.5 lbs. |
|
EZ-TorQ II 150i |
070803 |
15 - 150 |
169.5 - 1695 |
17.3 - 173 |
17mm Female/Hex* |
4.5 lbs. |
Accuracy ?0.5% of reading from 20% to 100%
Accuracy ?1% of reading from 10% to 20%.
Recommended for all small hand tools & non-impacting power tools.
Features a built-in transducer and graphic display.
Selection of two operation modes: (Track, Peak).
Four units of torque measurement available:
(lbf.in, cN.m, N.m, kgf.cm.)
Switchable 110V and 220V.
Four digit display.
Torque Analyzer operational in: English, Spanish, French, German, Italian and Chinese.
Selectable filters to eliminate unwanted 뱊oise?:
(500Hz, 1000Hz, 1500Hz, 3000Hz).
RS-232 interface to download readings in "real time."
"Flash" memory allows upgrades to be done by the user or via the internet.
Includes three PC Windows based software programs:
EZ Terminal - for updating firmware, selecting torque direction and
changing languages.
EZ Calibration - for multipoint calibrations.
Data Acquisition -collecting and analyzing data with Microsoft Excel®.
Includes screw type Run Down Adapters and a selection of both American and Metric screws along with washers to allow close simulation of actual joints.
Two methods of calibration are provided, a single point calibration (using a manual pot adjustment) and a multipoint calibration using EZ Calibration software.
Standard accessories include:
Six Screw Run Down Adapters
Universal Charger
RS-232 Cable
1/4?Female/Hex Square Drive Adapter
Mountz Data Acquisition Software
Case
 
* EZ-TorQ features a 17mm 6pt Hex Socket. The unit includes a 1/4 Female Hex Square Drive Adapter that slides into the socket.
|
|
|
Aura
(Auto Revering Run Down Adapters)
Once the tool shuts off, the AURA automatically unwinds for the next run down. Eliminates the need to back it out. |
|
|
|
|
Calibration Test Equipment:
For Torque Analyzers & Torque Sensors.
|
|
|
|
|
Calibration Hex Step Adapter: Allows multiple size wrenches to be used with one adapter. | |
Note!
Since a tester cannot always duplicate actual joint characteristic, the torque reading displayed on the EZ-TorQ may vary from the actual torque that a tool will apply to a joint. A run down adapter that simulates a variety of different joint characteristics is provided with the EZ-TorQ. When critical assemblies are involved, the torque output of the power tool being used should be verified on the actual assembly using a calibrated measuring torque tool.
|
|
|
Click on PDF icon to view or download EZ-TorQ Manual. |
|
|
|
Click on PDF icon to view or download EZ-TorQ Data Sheet. |
|
