|
MOUNTZ
LTT-Series Torque Tester
|
Model
|
Item #
|
Torque Ranges
|
Drive Size
inch
|
Weight
lbs.
|
|
American
|
S.I.
|
Metric
|
|
LTT10i
|
068400
|
1-10lbf.in
|
11.3-113.cN.m
|
1.2-11.5kgf.cm
|
1/4
|
8
|
|
LTT25i
|
068401
|
2.5-25lbf.in
|
28.25-282.5cN.m
|
2.9-28.8kgf.cm
|
1/4
|
8
|
|
LTT50i
|
068402
|
5-50lbf.in
|
56.5-565.cN.m
|
5.8-57.6kgf.cm
|
1/4
|
8
|
|
LTT100i
|
068403
|
10-100lbf.in
|
113-1130cN.m
|
11.5-115kgf.cm
|
1/4
|
8
|
|
LTT250i
|
068404
|
25-250lbf.in
|
282.5-2825cN.m
|
28.8-288kgf.cm
|
1/4
|
8
|
|
LTT50F
|
068405
|
5-50lbf.ft
|
6.8-67.8N.m
|
0.7-6.9kgf.m
|
3/8
|
8
|
|
LTT100F
|
068406
|
10-100lbf.ft
|
13.56-135.6N.m
|
1.4-13.8kgf.m
|
1/2
|
8
|
|
LTT250F
|
068407
|
25-250lbf.ft
|
33.9-339N.m
|
3.5-34.5kgf.m
|
1/2
|
8 |
Features
Accuracy +/- 0.5% of reading from 20% to 100% of full scale.
Accuracy +/- 1% of reading from 10% to 20% of full scale.
Recommended for all hand screwdrivers, wrenches or power tools.
Provides Z-Plug & Play?with Mountz Transducers. Features RCI technology,
an instant auto-recognition system of the transducer connected to the LTT.
Selection of six operating modes: (Track, Peak, First Peak, Audit, Torque + Angle, and Tool Test).
Seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm). Two units of force measurements: (lbf and kN)
Features built-in Tool Tests operation.
Includes three PC Windows based software programs:
Mountz Torque Meter Interface Program - for sensor calibrations, meter calibration and tool tests.
Torque Meter Bootloader - for updating the LTT operating systems.
Mountz Statistics Calculator - for SPC, CP & CPK calculations.
lash" memory allows upgrades to be done by the user in the field &
internet through the USB port.
Five low-pass filter selections (3000, 2000, 1500, 500 and 200 Hz).
Easy to use menu structure, a six-digit display and connect to an external transducer.
Real Time Clock for time stamping of readings. USB interface to download readings to PC.
High Capacity Li-Ion Batteries for long life (30 hrs with standard transducers and 16 hrs with brushless rotary).
Can connect to most mv/v transducers and can store calibration data for up to 50 non smart torque & force sensors.
The 5VDC capability allows unit to be used with a Brushless Rotary Transducer for testing pulse tools and high RPM tools.
Torque and Angle readings are displayed simultaneously and supports up to 8000 RPM.
Stores a total of 2500 data points.
Real time graph of torque vs. time using associated PC Windows software.
Features a Buzzer and Go / No Go LEDs that illuminate when high or low setting is achieved.
Display Accuracy is better than +/- 0.0625 of reading.
|
|
|
|
|
|
Note!
Since a tester cannot always duplicate actual joint characteristic, the torque reading displayed on the LTT may vary from the actual torque that a tool will apply to a joint. When critical assemblies are involved, the torque output of the power tool being used should be verified on the actual assembly using a calibrated measuring torque tool. |
|
|
|
|
|
Standard accessories include:
Universal Charger (100 - 240 VAC)
USB Cable
Software - Mountz Torque Meter Interface Program
Software - Torque Meter Bootloader
Software - Mountz Statistics Calculator
Run Down Adapter
Case
| |
|
|
|
|
|
Description
|
Item #
|
|
Charger (100 -240 VAC)
|
770300
|
|
USB Cable
|
770319
|
|
Battery Pack
|
072506
|
|
Run Down Adapters
|
| | | |
|
|
|
|
|
|
Designed to scan Bar Codes on Tools and start Tool Tests automatically.
Reduces operational time for users with a large number of Tool Tests stored in the analyzer.
The PTT & LTT are designed to work with this bar code reader
Model: Bar Code Reader
Item # 072997 | | |
|
|
Size (W x L x H): 6 3/4” x 6 3/4” x 1 3/8”
Weight: 1.3 lbs
| |
Connect 1-4 transducers to the Torque Analyzer simultaneously.
Eliminates the need to plug and unplug transducers.
When the PTT or LTT is connected to the Multiplexer it reviews the Multiplexer (Mux) to determine what transducers are
connected and downloads the identity and calibration data for each of the attached transducers.
Model: Multiplexer
Item # 072998
Note!
Operating the Multiplexer & Bar Code Reader Together
The Multiplexer can be used with the Bar Code Reader. This combination provides a flexible, time saving solution that reduces the potential for operator error. For users that have many Tool Tests and using multiple torque transducers, these two accessories is the ideal solution for torque testing.
|
|
Controlling torque is quintessential for companies to ensure that there product's quality, safety and reliability isn't compromised. Fasteners that are insufficiently torqued can vibrate loose and excessive torque can strip the threaded fasteners. Using a quality torque analyzer has become increasingly important for many companies to secure that proper torque is being applied.
Meeting the demands to test multiple torque ranges for various tools used in production, the analyzer features a built-in transducer and supports most external size transducers. |
|
|
|
|
|
|
|
|
| 
|
|
|
|
|
SMX Transducer
(Socket style)
|
|
|
|
2.5 lbf.in - 500 lbf.ft
For converting any ratchet wrench into a sensor. |
|
|
|
| 
|
|
|
|
|
|
BLRTSX Transducer
(Brushless Rotary style)
|
|
|
|
|
10 ozf.in - 738 lbf.ft
For pulse tools and high RPM power tools
| |
|
|
|
|
|
|
LTT Data Sheet
|
LTT Manual |
| | |
